How to Launch using EcuTEK RaceROM Launch Control
(Requires the feature to be active in your active ROM/map slot)
- Apply the brake as hard as possible
- Apply 100% Accelerator Pedal (Go beyond the kickdown switch)
- You can creep forward but do not release the brake completely
- Release brake to launch.
Launch Control
Launch Control Boost Target
When the launch control system is active the ECU will try to maintain this boost target.
Launch Control Hold AFR
When the launch control system is active the ECU will try to maintain this AFR target
Launch Control Hold RPM
When the launch control system is active the ECU will try to maintain this RPM target
Launch Control Ignition Base
Timing adjustment (typically a retard) to final ignition timing during launch control which will decay over time based on the Launch Control Ignition Blend percentage.
Launch Control Ignition Blend
Blend percentage for how much of the Launch Control Ignition Base will be used and how quickly it will decay over time.
Launch Control PID Int
Proportional component of the PID control impacting torque demand during launch control
Launch Control PID Prop
Proportional component of the PID control impacting torque demand during launch control
Launch Control Rev Limit Ramp In
Controls how quickly the RPM limiter changes after launch, can be adjusted to maximize traction.
