Introduction
ECU coding can be problematic on N55 and S55. Every time you flash the ECU, they lose the ECU coding. The car will not start and run until it has been recoded.
...
Note |
---|
This tool is for power users only, even among our tuners. If you have any doubts regarding the use of this tool, please contact EcuTek support for guided assistance |
Tool Usage
...
Query ECU <---- DO THIS FIRST
Like most EcuTek tools, the first thing you should do is press the Query ECU button so ProECU can identify exactly what kind of vehicle is connected.
Read Coding From ECU
This reads the current coding from the ECU and displays it at the bottom of the window
Read Coding From Library
This selects the coding shown in the dropdown box and displays it at the bottom of the window
Save Coding To File
This saves the coding that is currently displayed at the bottom of the window.
Write Coding To ECU
The coding currently displayed at the bottom of the window will be written to the ECU.
Coding Library
ProECU stores its coding backups in a file called BMWCoding.bin. The tool reads this file and lists the available backups in the drop down box at the top right of the window. There are some checkboxes that help you find an appropriate coding for the current vehicle. There is also a selection of default coding for various vehicles.
Import From Another Library
If you have another BMWCoding.bin file, perhaps from another laptop or given to you by another tuner, you can add all of the coding records
from it into your library.
Import From A Coding File
If you have saved a coding record using the "Save Coding To File" button then you can load it into your library.
Import From An ECU Backup
This button will search for coding in the eeprom section of an ECU backup taken using the bflash or autotuner tools. (.bdc, .RomDump or dflash0.bin, dflash1.bin)
...
coding because the records can still be found in the EEPROM.
Example workflows
Example 1: Recovering an ECU where you have a coding backup
Click "Query ECU"
Check "Only Show Coding Backups for Current VIN"
Select a coding backup from the dropdown box
Click "Read Coding From Library"
Click "Write Coding To ECU"
Example 2: Recovering an ECU where you don't have a coding backup, but there are similar vehicles in the coding library
Click "Query ECU"
Check "Only Show Coding Backups for Current Model"
Select a coding backup from the dropdown box
Click "Read Coding From Library"
Click "Write Coding To ECU"
Example 3: Recovering an ECU where you don't have a coding backup, but you do have a bflash backup (or can make one)
Click "Query ECU"
"Click Import from an ECU Backup"
Select the bdc file and press OK.
Select the coding from the dropdown box
Click "Read Coding From Library"
Click "Write Coding To ECU"
Common Problems
3300 Coding Section Issues
The 3300 section of the coding is only allowed to be written during the first 100 hours of the vehicle life. After 100 hours, that section becomes locked. When EcuTek unlock the ECU, we remove this restriction so that our tuners can edit the VMAX field for example. Some other tools do not expect this section to be writable and will accidentally write incorrect data to it.
...