You'll need to update your ProECU Software AFTER purchasing the live tuning option in order for this feature to work properly. Retail Software does NOT have Live Tuning capability |
You'll tune the car as normal using the live tuning method however there are some items to keep in mind while doing so.
Map tracing is not the same as live tuning. Some maps are not able to trace properly due to limitations of data conversion and live data.
Just because a map is not tracing properly does not mean the values are being used incorrectly. |
To live tune a map, select “Start” from the Live Tuning pulldown, or use the Ctrl-T hot key. The map will be highlighted in green while active. You can open up to 8 maps for live tuning at one time. It's possible to disable live tuning on a map when finished, however the changes will no longer be applied to the ECU until it is saved and flashed to the vehicle, or re-enabled. This enables you to tune multiple maps i.e. ignition map 1, 2 ... while live connected in the same sitting.
Once you're finished with live tuning save the changes to the ROM and save the rom as normal. After which change the ROM variant to the normal version and flash the completed map to the vehicle.
Video Link to show Live tune in action