/
EcuTek Bench Programmer

EcuTek Bench Programmer

The EcuTek Bench Programmer (EBP) is a device which allows programming/unlocking specific ECUs on the bench. These ECUs require particular signals that only the EBP can generate.

 

EBP_medium.png

How to use

  1. Connect the EBP to the PC using the supplied USB cable

  2. Connect the EBP to the supplied power adapter

  3. Connect the power adapter to the mains

  4. In ProECU, select Tools > Bench Programmer Tool

    ProECU_BenchProgrammerToolMenu.png
    ProECU_BenchProgrammerToolWindow.png

  5. Select the ECU to program

  6. Connect the ECU to the EBP, using either:

    • An ECU-specific bench programming cable.

    • A breakout cable, connecting individual wires to the ECU pins.
      To see the required connections, click the Help button.

  7. Perform the required operation (for instance, Unlock)

Pinout

EBP pinout.png
(male connector on EBP shown)

Status indicators

LED

Colour

Meaning

LED

Colour

Meaning

STATUS

[off]
GREEN
RED

USB not connected or USB in standby.
Ready
Data transfer in progress

12V IN

[off] *
GREEN
RED (blinking)

No voltage from external power supply.
Voltage from external power supply ok.
Incorrect voltage from external power supply.

12V OUT

[off] *
GREEN
RED (blinking)

Power output is OFF.
Power output is ON (voltage is being supplied to the ECU).
Overload or short circuit detected

* This led will also be OFF when the STATUS led is OFF.