MG1CS024 (B58 Gen2 / S58 / Mini B48)
This page describes the unlock requirements and methods for the MG1CS024 ECU found primarily in the B58 gen2 and similar cars. SBOOT refers to the system bootloader, sometimes referred to as the Bosch bootloader, accessible using bench tools, while CBOOT refers to the customer bootloader, sometimes referred to as the BMW bootloader in this case, and is used by the OBD unlock.
Available unlocks
These are the known available unlocks as of January 2026.
Please note that this information can change over time.
Pre-2020
Post-2020
| SBOOT1 | CBOOT2 | Unlock via | Notes |
|---|---|---|---|---|
Femto maps-only unlock | Locked | Partially unlocked | Mail-in | Not supported |
Femto full unlock | Unlocked | Unlocked | Mail-in | Supported3 |
Cecky Tuning unlock | Unlocked | Unlocked | Mail-in | Supported3 |
AutoTuner unlock | Unlocked4 | Unlocked | Mail-in | Supported3 |
Notes:
An unlocked SBOOT allows programming the ECU on the bench and re-unlocking CBOOT if needed.
An unlocked CBOOT allows programming custom ROMs into the ECU over OBD.
The 3rd-party unlocks will have to be upgraded to the EcuTek CBOOT unlock.
AutoTuner uses a custom SBOOT unlock. Due to this, the ECU cannot be programmed on the bench with ProECU’s Bench Unlock Tool. If needed, CBOOT can only be re-unlocked on the bench using the AutoTuner software.
Tuning Process
ProECU
If the ECU is stock, the tuner gets the ECU unlocked (either with ProECU, when possible, or by shipping the ECU to a 3rd party which is able to do it)
If the ECU was unlocked by a 3rd party, the tuner upgrades the ECU to the EcuTek CBOOT unlock using the OBD Unlock Tool. This is done by selecting the option Put an EcuTek License into an ECU that is already unlocked and/or tuned.
The tuner or end-user programs the ECU with ProECU
ECU Connect (PhoneFlash)
If the ECU is stock, the tuner gets the ECU unlocked (either with ProECU, when possible, or by shipping the ECU to a 3rd party which is able to do it)
The end-user programs the ECU with ECU Connect
(if the ECU contains a 3rd party unlock, it is automatically upgraded to the EcuTek CBOOT unlock on the first flash)
Other PhoneFlash information
When using the Return To Factory State functionality:
If the user chooses to keep the ECU unlocked, the EcuTek CBOOT unlock will be downgraded to a generic CBOOT unlock.
If the user chooses to re-lock the ECU, the factory CBOOT (locked) will be restored.