You can manually add (Pair) an EVI-BT or EVI-BTLE in ECU Connect (or your phones Bluetooth settings). You may need to do this if you have gotten a new EVI or had download the app and set it up without configuring an EVI-BTLE or BT.
To do this start by connecting the EVI-BTLE or EVI-BT to OBD or USB power and check that the light is slow flashing green (Vehicle Interface LED Color Status). Then from the main screen and go to the settings wheel
...
To find the device type look at the sticker on the EVI to see what type of vehicle interface you have.
NOTE: You can also check if the device is an EVI-BT or BTLE by using the the standalone updater or Proecu and checking the device revision. Rev 7 and above is Bluetooth Low Energy (BTLE). ( https://www.ecutek.com/evi-update/ )
...
Once you choose the correct device type you will be guided through the process, Fort For BTLE devices the EVI is added through the App. you press the plus button
...