You can manually add (Pair) an EVI-BT or EVI-BTLE in ECU Connect (or your phones Bluetooth settings). You may need to do this if you have gotten a new EVI or had download the app and set it up without configuring an EVI-BTLE or BT.
To do this start by connecting the EVI-BTLE or EVI-BT to OBD or USB power and check that the light is slow flashing green (ECU Connect Vehicle Interface LED Color Status). Then from the main screen and go to the settings wheel
...
To find the device type look at the sticker on the EVI to see what type of vehicle interface you have.
NOTE: You can also check if the device is an EVI-BT or BTLE by using the the standalone updater or Proecu and checking the device revision. Rev 7 and above is Bluetooth Low Energy (BTLE). ( https://www.ecutek.com/evi-update/ )
...
EVI-BTLE addition Instructions
For EVI-BTLE follow the instructions here
...
Once complete you are ready to use the app. Press the Finish button and the app main screen will appear.
...
EVI-BT Addition Instructions
For Normal EVI-BT follow the instruction prompts from the app
...