BMW RaceROM Display Hijack
Sports Display Options
This map sets up the different options for what the two gauges can do. These will need to be changed from the stock operation option prior to using them for custom maps. etc.
- Custom Map Output During Map Switch
This option displays the output value of a custom map whenever you're going through the process of changing maps. (When you hit cancel on the cruise control prior to changing maps). Set in the output definition section of the custom map you are using. - Custom Output Always
Setting this to active will always output the value of a custom map. Set in the output definition section of the custom map you are using. - RaceROM Controller Input
Use of this function allows the use of the display as an adjustable percentage to use as an input for RaceROM custom Maps. To Set you'll need to add the selected display as the channel input. - Ethanol Content During Map Switch
Displays ethanol content when going through the process of changing maps.
RaceROM Controller Power/Torque Default
The default level (%) for either the Power or Torque gauge to be set to. For use when using this function as an input.
RaceROM Controller Power/Torque Max
The maximum level (%) for either the Power or Torque gauge to be set to. For use when using this function as an input.
RaceROM Controller Power/Torque Min
The minimum level (%) for either the Power or Torque gauge to be set to. For use when using this function as an input.
RaceROM Controller Power/Torque Name for App
Changes the name shown in the map/mode switch menu of the Ecu Connect app.
RaceROM Power/Torque Gauge Max
Sets the maximum number to be shown on the gauge. While a percentage value being output to the gauge will always read correctly (i.e. 75% goes to 3/4) the numbers will differ. This map adjusts the scaling of the gauge in order to correct that issue. Some vehicles utilise slightly different scaling for the gauge system, since ours from the factory goes up to 800, we set the value to 400, as we can easily divide by 4 to get the actual value. However the values you'll want to use are going to differ based on the scale used by your display.
Adjusting the Display Hijack Value for Custom Map Inputs
In order to adjust the output value for either the power or torque hijack gauges you'll go through the following procedures.
- Hold the resume button on the cruise control.
- you should see the rpm and sport gauges move.
- In the first position you can change maps (as indicated on the tach)
- Press resume again to adjust the Torque gauge value.
- Press it one more time to adjust the power value.
EcuTek ProECU tuning tools tools should only be used by experienced tuners who understand the product and engine calibration.
If you do not fully understand this product then you WILL damage your engine, ECU or your vehicle.
Please ensure you fully read all EcuTek manuals BEFORE attempting to use ProECU with your laptop or your vehicle.
Use with extreme caution and understanding at all times, if in doubt then do not proceed.
EcuTek accepts no responsibility for any damage to the engine, ECU or any part of the vehicle that results directly or indirectly from using the product.
** If you are in any doubt that you do NOT have the experienced required to use this product then you should NOT USE IT **
Retail customers
** If you have any doubt that you do NOT have the experienced required to use this product then you should NOT USE IT, you should simply contact your EcuTek Master Tuner shown clearly on the top of your Programming Kit or visit your preferred tuning shop to have a professional tuner to use it for you **