Phase9
Boost Control
Flex Fuel integration for target and limit
Separate high/low altitude wastegate base duty maps
Overall enable RPM below which the wastegate solenoid is disabled
Boost control activation based on VVT status
Safety limits for boost target
WG base duty multiplier for gear/IAT
Throttle based boost limit per mapswitch Mode
Custom sensor input definition
PI Fuel pressure sensor
Coolant pressure sensor
Flex Fuel sensor (Ethanol Content)
Wideband O2 Sensor
Define Min and Max voltages to detect failed sensor
Set default value for failed sensors
Adjustable sensor filtering
Closed Loop Full Load Fuel Control
Closed Loop control
Enable per Map Switch mode
Easy to tune!
Flex Fuel
Optionally define a pre-determined ethanol content override per map switch mode
Sensor smoothing
Sensor output freezing to combat fluctuations caused by aerated fuel
Ignition offset map
Fuel multiplier map
AFR target offset map
Separate live data values for actual sensor output (which may vary with inadequate fuel systems) and the ethanol content carried forward into the Flex Fuel strategy (which may be fixed due to load thresholds per Map switch mode).
Custom Maps
Added additional inputs
AFR - Actual
AFR - Target
AFR - Wideband
Boost Target
Clutch Pedal
Coolant Pressure
Fuel Pressure
Ethanol Content
Gear shift sensor
Ignition timing final
Injector open time DI
Injector open time PI
Knock correction
Lateral G
Launch RPM
Launch RPM Error
Wheel slip
Added new outputs
Boost target
Torque actual
SD volumetric efficiency
Added axis selection criteria function for easy safeguards
Added separate deactivation timer
Speed Density
Added Atmospheric Pressure Compensation
Added the ability to blend MAF and SD airflow calculations for better transitions.