Versions Compared

Old Version 8

changes.mady.by.user Brandyn Mowat

Saved on

compared with

New Version Current

changes.mady.by.user Brandyn Mowat

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.



RaceROM Burble Control



Introduction

EcuTek RaceROM is a package of special software features that can be installed into the ECU of the supported vehicles. You simply open your ECU ROM file using EcuTek software, apply the RaceROM Feature File (Patch) to it, adjust the RaceROM maps as necessary, and then program the ROM file into the vehicle.

Please read How to: Add/Remove EcuTek Race Rom to your Vehicle. Feature File Guide for info on how RaceROM works, how to install and uninstall RaceROM feature files, and further hints and tips.

The current RaceROM features are listed below. Features marked ** are only available to trade customers, or retail customers that have purchased the optional RaceROM MX5 upgrade.

Please also see our website for various videos and webinars for further information.


Note

For information on how to control this feature through the app check out our guide here: Controlling Custom Maps With ECU Connect APP


Panel

Table of Contents

Table of Contents
absoluteUrltrue
printablefalse



Supplemental Content

Platform Specific

B58 / A90 Supra

Child pages (Children Display)
pageB58 / A90 Supra


F-Series

Child pages (Children Display)
alltrue
pageBMW

General



Burble Feature

RaceROM Burble control gives a finer degree of control for the factory exhaust burbles, as well as when the system should activate.





Burble Aggression by Mapswitch Mode

Sets the percentage of how aggressive the burbles should be.






Burble Control (RaceROM)

Sets the Burble system active per map switch slot (mode).  If the stock parameters are active the RaceROM maps will not be utilised.






Burble Max Time (RaceROM)

Adjusts the duration of the burbles based on how fast the vehicle is moving.






Burble Options (RaceROM)

Offers to toggle the burble system to be active in ECO mode, and to force the exhaust valve open when the burbles are occurring.






Ignition Minimum for Hard Burble

Sets the minimum ignition timing the computer will utilise when using the "Hard" burble.




Ignition Minimum for Soft Burble

Sets the minimum ignition timing the computer will utilise when using the "Soft" burble.







Warning

EcuTek ProECU tuning tools tools should only be used by experienced tuners who understand the product and engine calibration. 
If you do not fully understand this product then you WILL damage your engine, ECU or your vehicle. 
Please ensure you fully read all EcuTek manuals BEFORE attempting to use ProECU with your laptop or your vehicle. 
Use with extreme caution and understanding at all times, if in doubt then do not proceed. 
EcuTek accepts no responsibility for any damage to the engine, ECU or any part of the vehicle that results directly or indirectly from using the product.


** If you are in any doubt that you do NOT have the experienced required to use this product then you should NOT USE IT **


Retail customers

** If you have any doubt that you do NOT have the experienced required to use this product then you should NOT USE IT, you should simply contact your EcuTek Master Tuner shown clearly on the top of your Programming Kit or visit your preferred tuning shop to have a professional tuner to use it for you ** 



Insert excerpt
Contact Us
Contact Us
nopaneltrue





Table of Content Zone
Anchor
Table of Contents
Table of Contents

Table of Contents