Introduction

EcuTek RaceROM is a package of special software features that can be installed into the ECU of the supported vehicles. You simply open your ECU ROM file using EcuTek software, apply the RaceROM Feature File (Patch) to it, adjust the RaceROM maps as necessary, and then program the ROM file into the vehicle.

Please read How to: Add/Remove EcuTek Race Rom to your Vehicle. Feature File Guide for info on how RaceROM works, how to install and uninstall RaceROM feature files, and further hints and tips.

The current RaceROM features are listed below. Features marked ** are only available to trade customers, or retail customers that have purchased the optional RaceROM MX5 upgrade.

Please also see our website for various videos and webinars for further information.

Supplemental Content

Platform Specific

B58 / A90 Supra

F-Series

General

• ECU Programming Overview

• Software Help and How-To

• EcuTek Knowledge Base

Burble Feature

RaceROM Burble control gives a finer degree of control for the factory exhaust burbles, as well as when the system should activate.

Burble Aggression by Mapswitch Mode

Sets the percentage of how aggressive the burbles should be.

Burble Control (RaceROM)

Sets the Burble system active per map switch slot (mode).  If the stock parameters are active the RaceROM maps will not be utilised.

Burble Max Time (RaceROM)

Adjusts the duration of the burbles based on how fast the vehicle is moving.

Burble Options (RaceROM)

Offers to toggle the burble system to be active in ECO mode, and to force the exhaust valve open when the burbles are occurring.

Ignition Minimum for Hard Burble

Sets the minimum ignition timing the computer will utilise when using the "Hard" burble.