| Table of Contents |
|---|
...
For information on how to program as well as flash recovery, check out.
NOTE: With all of the VW AG DSG’s gearbox adaptations must be completed after programming or it will not learn the new parameters to achieve clutch and line Pressures desired.
...
VW AG DQ381 Example ROM Description
Example ROMs (Example_DQ381F_2019_Golf GTI PP 0GC20G_2404_enc.bin) are found here C:\EcuTek\Stock ROMs\Volkswagen\Mk7.5\DSG\DQ381 Example ROMs.
Torque
The most important parameter for the DSG is the Input Torque which is received over CAN from the ECM. You must have accurate torque estimation in the torque to air and air to torque maps in the ECM, see the ECM tuning guide on how to set these maps up (VW AG EA888 Engine Tuning).
...
Forced Upshift and downshifts are set in the shift schedule category and are used to prevent engine stall by forcing a downshift and overrev by forcing an upshift. The forced up and down shift maps are 2D maps with shift type ( from which gear up or down).
Note: Once again ProECU cannot represent the X axis Rows with text data the values of the rows are as per below.
Forced Upshifts are set by vehicle speed for each shift number (i.e.1st to 2nd).
...