You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 2
Next »
v3.6
- Added RaceROM Flex Fuel
- Allows sensor input through sensor hijack or the addition of an ECU pin
- Added the ability to add a Fuel Pressure Sensor
- Allows sensor input through sensor hijack or the addition of an ECU pin
- Added sensor hijack torque limit to go into a failsafe mode if a sensor goes out of range.
- RaceROM Map Switching via cruise control buttons (before only possible via EcuConnect App)
- Valet Mode Enable/Disable via cruise control buttons (before only possible via EcuConnect App)
- Separately Scalable Manifold Pressure Sensor Scaling (Previously scaling was shared with the pre-throttle boost sensors)
- Quality of life improvements
- Fans switched off during programming
- No more delay for reading EEPROM data i.e. saved map switch mode.
- Added RaceROM Launch Control BETA
- One click toggle to disable all RaceROM features (Except logging) allows calibration of stock tables.