VR30DDTT RaceROM Versions

Owned by Brandyn Mowat
Last updated: Sept 18, 2019

v3.6

  • Added RaceROM Flex Fuel see tuning guide here - VR30DDTT RaceROM Flex Fuel

    • Allows sensor input through sensor hijack or the addition of an ECU pin

  • Added the ability to add a Fuel Pressure Sensor

    • Allows sensor input through sensor hijack or the addition of an ECU pin

  • Added sensor hijack torque limit to go into a failsafe mode if a sensor goes out of range.

  • RaceROM Map Switching via cruise control buttons (before only possible via EcuConnect App)

  • Valet Mode Enable/Disable via cruise control buttons (before only possible via EcuConnect App)

  • Separately Scalable Manifold Pressure Sensor Scaling (Previously scaling was shared with the pre-throttle boost sensors)

  • Quality of life improvements

    • Fans switched off during programming

    • No more delay for reading EEPROM data i.e. saved map switch mode.

  • Added RaceROM Launch Control BETA

  • One click toggle to disable all RaceROM features (Except logging) allows calibration of stock tables.