/
Evo 5 & 6 Programming and Logging Wiring
Evo 5 & 6 Programming and Logging Wiring
In order to program the Mitsubishi Evo 5 and 6 ecu you’ll need to make a few quick tweaks to the wiring underneath the dash. You’ll need to link pin1 on the OBD diagnostic port (Light Green Wire) to Pin 4 or 5 which provide the ground signal required to program and log the ECU.
, multiple selections available,
Related content
K-Line Mitsubishi Programming
K-Line Mitsubishi Programming
More like this
Mitsubishi Diesel Auto Stop and Go Wiring/Programming (2012+)
Mitsubishi Diesel Auto Stop and Go Wiring/Programming (2012+)
More like this
Subaru EJ Programming Guide
Subaru EJ Programming Guide
More like this
Lancer Evo 5-9 Tuning Guide
Lancer Evo 5-9 Tuning Guide
More like this
ECU Programming Overview
ECU Programming Overview
More like this
ProECU BMW ECU Unlock Tool
ProECU BMW ECU Unlock Tool
More like this