This menu allows you to see more information on your vehicle. In addition to seeing the type of vehicle currently in use, you can get information such as your VIN, calibration ID of your car, or even information on when it was last flashed by the software.
The dashboard allows you to view live data graphically, making it easier to see important parameters easily, rather than waiting for a datalog. This can be especially handy when driving your vehicle hard at the track etc. As it allows you to keep track of important parameters like knock and fluid temperatures. In some cases you can also view data like brake pressure and g-force to get a better idea of the conditions the vehicle was under.
Tapping the screen once allows you to edit the screen, changing parameters, the size and style of the gauge, as well as what is being viewed. For more information on how to customize the dashboard, check out our guide ECU Connect: Dashboard Customisation Tutorial
In order to datalog, hop over to this menu. A default logging list with some relevant monitors should already be loaded. In order to edit what you log, click the gear in the upper right corner, and check the box next to each monitor you'd like to have active, and uncheck it if you don't want it logged. If something happens that you'd like to call specific attention to make sure to click the "Add Mark" option to add a mark to the log. When you're finished and before you turn off your car, click the option to stop logging.
If your tune was set up with multiple map slots, It can be set up to utilise certain switches found on your vehicle such as the cruise control. With the app it's now possible to switch maps in the event your car doesn't have cruise control or as a matter of preference.
Using the slider, you can adjust what RPM your launch control will hold at, allowing you to make fine adjustments for traction without needing to reflash.
The DTC menu allows you to check each module for Diagnostic Trouble Codes. Also let's you clear the codes. Any history of codes will be saved to your "My Files" section of the APP.
With emissions being a big part of life these days, it's important to find out if your car is setting readiness before bringing it in, to avoid wasting time and money when your car is in need of additional repairs. The toggle at the top shifts between showing if the car has set readiness since the last time the ECU was reset while the tab for "This Driving Cycle" shows whether or not the test has finished running on the current key cycle.
The performance analyzer runs a test allowing you to run a few tests on your vehicle's performance. In order to do so find a straight stretch of road in a safe area off of public roads and come to a complete stop. When you're ready to start hit "New Run" and the test will run, automatically shutting off. After it shows your results it will also save a shareable shot of your performance to the "My Files" section